半導体式圧力トランスデューサXTEH-7L-190

123 HIGH TEMPERATURE PRESSURE TRANSDUCER XTEH-7L-190 (M) SERIES • –65°F To 750°F Temperature Capability • Patented Leadless Technology VIS® • High Natural Frequency • Suitable For Turbine Engine Testing The XTEH Series pressure transducers feature a very wide operating temperature range. These characteristics make these devices ideal for Turbine engine testing. Other equally demanding applications in the industry may also benefit from the ruggedness of these devices. Kulite recommends the KSC-2 signal conditioner to maximize the measurement capability of the XTEH-7L-190 transducer. 1.04 (26.4) .375 .17 (9.5)“L” (4.3) HEX CRUSH RING .150 (3.8) 4 CONDUCTOR #30 AWG SHIELDED 30" LONG (762) “B” SCREEN STANDARD “M” SCREEN OPTIONAL 4 CONDUCTOR #30 AWG THREAD “T” SHIELDED CABLE 525°F 24” (610) 750°F(274°C) (400°C) COMPENSATION MODULE 300°F MAX. (150°C) WIRING 1.3 (33) LONG x .225 (5.7) DIA. P/N* "T" "L" COLOR DESIGNATION 190S 10-32 UNF-2A .437 11.1 mm RED + INPUT 190SM M5 x .8 .437 11.1 mm BLACK - INPUT 190L 10-32 UNF-2A .760 19.3 mm *LENGTH MUST BE STATED ON P.O. GREEN + OUTPUT AT TIME OF ORDER PLACEMENT. 190LM M5 x .8 .760 19.3 mm WHITE - OUTPUT 1.7 3.5 7 14 21 35 70 140 210 BAR Pressure Range 25 50 100 200 300 500 1000 2000 3000 PSI Operational Mode Absolute, Sealed Gage Over Pressure 2 Times Rated Pressure to a Maximum of 4500 PSI (310 BAR) Burst Pressure 3 Times Rated Pressure to a Maximum of 5000 PSI (350 BAR) 1.5 Times Rated Pressure to a Maximum of 5000 PSI (350 BAR) Pressure Media Most Liquids and Gases - Please Consult Factory Rated Electrical Excitation 10 VDC Maximum Electrical Excitation 12 VDC Input Impedance 1000 Ohms (Min.) Output Impedance 1000 Ohms (Nom.) Full Scale Output (FSO) 100 mV (Nom.) Residual Unbalance ± 5 mV (Typ.) Combined Non-Linearity, Hysteresis and Repeatability ± 0.1% FSO BFSL (Typ.) ± 0.5% FSO (Max.) Resolution Infinitesimal Natural Frequency of Sensor Without Screen (KHz) (Typ.) 240 300 380 500 575 700 1000 1400 1650 Acceleration Sensitivity % FS/g Perpendicular 5.0x10-4 3.0x10-4 1.5x10-4 1.1x10-4 9.0x10-5 6.5x10-5 4.0x10-5 2.5x10-5 1.9x10-5 Insulation Resistance 100 Megohm Min. @ 50 VDC Operating Temperature Range -65°F to +750°F (-55°C to +400°C) - Pressure Sensing Area -65°F to +525°F (-55°C to +274°C) - Cable Area Compensated Temperature Range +80°F to +650°F (+25°C to +343°C) Thermal Zero Shift ± 1.5% FS/100°F (Typ.) Thermal Sensitivity Shift ± 1.5% /100°F (Typ.) Linear Vibration 10-2,000 Hz Sine, 100g. (Max.) Mechanical Shock 20g half Sine Wave 11 msec. Duration Electrical Connection 4 Conductor 30 AWG Shielded Cable (30" Before Module, 24" After Module) Weight 8 Grams (Nom.) Excluding Cable Pressure Sensing Principle Fully Active Four Arm Wheatstone Bridge Dielectrically Isolated Silicon on Silicon Patented Leadless Technology Mounting Torque 15 Inch-Pounds (Max.) 1.7 N-m Note: Requires external compensation module (Max. temp. 400°F) Please refer to outline drawing. Note: Custom pressure ranges, accuracies and mechanical configurations available. Dimensions are in inches. Dimensions in parenthesis are in millimeters. All dimensions nominal. (N) Continuous development and refinement of our products may result in specification changes without notice. Copyright © 2014 Kulite Semiconductor Products, Inc. All Rights Reserved. Kulite miniature pressure transducers are intended for use in test and research and development programs and are not necessarily designed to be used in production applications. For products designed to be used in production programs, please consult the factory. KULITE SEMICONDUCTOR PRODUCTS, INC. • One Willow Tree Road • Leonia, New Jersey 07605 • Tel: 201 461-0900 • Fax: 201 461-0990 • http://www.kulite.com PHYSICAL ENVIRONMENTAL OUTPUT INPUT